CX=NORMAL_OPS, EMLM=DISABLED, CLM=CLM_OFF, ERCA=DISABLED, EDBG=DISABLED, ACTIVE=IDLE, HALT=NORMAL_OPS, ECX=NORMAL_OPS, HOE=NORMAL_OPS, ERGA=DISABLED
Control
| EDBG | Enable Debug 0 (DISABLED): When the chip is in Debug mode, the eDMA continues to operate. 1 (ENABLED): Entry of the chip into Debug mode is effective |
| ERCA | Enable Round Robin Channel Arbitration 0 (DISABLED): Fixed priority arbitration within each group 1 (ENABLED): Round robin arbitration within each group |
| ERGA | Enable Round Robin Group Arbitration 0 (DISABLED): Fixed priority arbitration 1 (ENABLED): Round robin arbitration |
| HOE | Halt On Error 0 (NORMAL_OPS): Normal operation 1 (HALT_ON_ERROR): Error causes HALT field to be automatically set to 1 |
| HALT | Halt eDMA Operations 0 (NORMAL_OPS): Normal operation 1 (HALT_DMA): eDMA operations halted |
| CLM | Continuous Link Mode 0 (CLM_OFF): Continuous link mode is off 1 (CLM_ON): Continuous link mode is on |
| EMLM | Enable Minor Loop Mapping 0 (DISABLED): Disabled 1 (ENABLED): Enabled |
| GRP0PRI | Channel Group 0 Priority |
| GRP1PRI | Channel Group 1 Priority |
| ECX | Error Cancel Transfer 0 (NORMAL_OPS): Normal operation 1 (CANCEL): Cancel the remaining data transfer |
| CX | Cancel Transfer 0 (NORMAL_OPS): Normal operation 1 (CANCEL): Cancel the remaining data transfer |
| VERSION | eDMA version number |
| ACTIVE | eDMA Active Status 0 (IDLE): eDMA is idle 1 (ACTIVE): eDMA is executing a channel |